Enerwatt FAT BIKE Guide D'utilisation page 13

2. BASIC STRUCTURE AND NAME
1. LCD display 2. Grip
7. Frame 8. Front light
13. Disc plate 14. Hub
19. Saddle post 20. Pedal assistance
25. Chain 26. Derailleur
3. ASSEMBLY METHOD AND REQUIREMENTS
3.1 INSTALLING OF HEADLIGHT AND FRONT FENDER
1. Place this ring
5. Place a thick black ring
8. Place all four
same ring
12. Also tighten right side and left side
First check all parts, then assemble the pieces as shown in the picture (note the direction)
and insert the bolt from the top and tighten the nut.
3. Gear shift
9. Front fork
15. Disc brake device
21. Crank
27. Kickstand
2. Place the golden wave ring and
then put the frame
6. Place small ring
9. Place the handle bar 10. Place this
smallest one
13. Then place black nut
4. Brake lever
10. Tire
16. Controller
22. Pedal
28. Mudguard
3. Continue to place golden
wave ring
7. Place thickest ring
11. Tighten the smallest one
MODEL: FAT BIKE
EWV-A6AH26F USER'S MANUAL
5. Handlebar 6. Stem
11. Rim 12. Spoke
17. Battery 18. Saddle
23. Motor 24. Gear
29. Rear light 30. Bottle mount
4. Place larger black ring
3