Enerwatt FAT BIKE Guide D'utilisation page 11

1. SAFETY INSTRUCTIONS AND NOTES
1.1 Safety instructions
1.2 Notes
2. BASIC STRUCTURE AND NAME
3. ASSEMBLY METHOD AND REQUIREMENTS
3.1 Installing the headlight and front fender
3.2 Installing the front wheel
3.3 Installing the front brake
3.4 Installing the steering handle
3.5 Installing torque for the locking bolts
4. OPERATION AND ADJUSTMENTS
4.1 Introduction the power assistant system
4.2 Operating the display
4.3 Charging battery
4.4 Reflection and lightening system
4.5 Safety height marks
4.6 Braking system
4.7 Speed control system
4.8 Damping system
5. USE AND MAINTENANCE
5.1 Routine inspection before use
5.2 Daily use, inspection and maintenance
5.3 Maintenance
6. RIDING INSTRUCTIONS
Electric-power-assisted bicycle, equipped with pedals and an auxiliary electric motor.
The bicycle cannot be propelled exclusively by means of this auxiliary electric motor, except in start-up assistance mode,
and the start-up assistance speed is less than 6 km/h.
Compared to a conventional bicycle, the electric bicycle is similar with the sole addition of the motor, controller,
charger, and battery. When riding, the electrical power makes riding easier and saves effort.
Items in the box: When you open the box, please check that the following items are included.
If any item is missing, please contact your agent.
7. TROUBLESHOOTING
3.2.1 Installing the common front wheel
3.2.2 Installing the brake cable
3.3.1 Mounting the rotor to the hub
3.3.2 Mounting the adapter and caliper
3.3.3 Installing the brake cable
4.3.1 Installing and charging the battery
4.5.1 Safety height line of the stem
4.5.2 Saddle position
4.7.1 Gear shifts and derailleurs
4.7.2 Adjusting the gear shifts
4.7.3 Adjusting the chain
MODEL: FAT BIKE
EWV-A6AH26F USER'S MANUAL
1