Operation; Operatin Sequence; Overview Of The Control Devices - Nouvag TCM Endo V Mode D'emploi

NOUVAG AG

7.1 Operatin sequence

1) Turn on control unit with main switch (back panel):
see chapter 7.3 Switching on the control unit
2) Adjust speed:
see chapter 7.4 Adjusting the rotational speed
3) Adjust the torque limit:
see chapter 7.5 Adjusting the torque limitation
4) "Auto Control"-Modus adjustment:
see chapter 7.6 Adjust "Auto Control" mode
5) To activate the function control of the Apex- Locator:
see chapter 8 Performance control Apex-Locator
6) Hanging the lip connector in the patient's lower lip:
see chapter 7.7 Hanging up the lip connector
7) Start the Motor:
see chapter 7.8 Switching on the motor
F
The device is now ready for use!

7.2 Overview of the control devices

A) Display: Speed or torque display.
B) Button "▼":
Speed or torque reduction.
No. 31943 35/05

7 Operation

A
H
B C
D E
F G
TCM Endo V
J
I
7