Layout And Function; Layout; Components Of The Logo! 8 Tp Edutrainer - Festo LOGO! 8 TP EduTrainer Notice D'utilisation

9 Layout and function

9.1 Layout

The LOGO! 8 TP EduTrainer
Didactic equipment system. LOGO! is a modular mini control system. The LOGO! 8 TP EduTrainer
a LOGO! Basic with 8 integrated digital inputs and 4 digital outputs. Power is supplied by and external
24 V DC voltage source. 4 mm safety sockets are used as interfaces to the automated process.
The LOGO! 8 TP EduTrainer
benchtop device on the profile plate.

9.2 Components of the LOGO! 8 TP EduTrainer

The LOGO! 8 TP EduTrainer
•
LOGO! Basic with integrated inputs and outputs: 8 digital inputs, 4 of which can be used as analog
inputs, 4 relay outputs
• Expansion module LOGO! DM8: 4 digital inputs, 4 relay outputs
•
Expansion module LOGO! AM2 AQ: 2 analog outputs
The LOGO! 8 TP EduTrainer
© Festo Didactic 8086581
® has been designed as a plug-in unit for the ER mounting frame of the Festo
® can be installed to the mounting frame of the equipment system or used as a
®
® consists of the following components
® is supplied fully assembled and tested.
LOGO! 8 TP EduTrainer
1 24 V-safety sockets
2 Safety sockets for inputs
3 0 V-safety sockets
4 LOGO! Basic with integrated inputs and outputs
5 Network socket
6 Safety sockets for outputs
7 Expansion module LOGO! DM8
8 Expansion module LOGO! AM2 AQ
9 Safety sockets for analog outputs
®
– Operating instructions
® consists of
33