CONTROL ELEMENTS:
STEREO - 2 WAY MODE
MODE BUTTON
1
2
1
GAIN INPUT
Controls the volume of the input signal.
2
LOW CUT SWITCH / LOW CUT LED
High pass filter (40 Hz, 18 dB/octave); LED indicator when filter is activated.
3
XOVER FREQUENCY
Sets the crossover frequency between bass and mid / high signal.
4
LED x10 (switch on the back panel
LED off, crossover frequency between 45 and 960 Hz.
LED on, crossover frequency between 450 and 9600 Hz.
5
LOW OUTPUT
Volume control for bass signal. (dependent on the frequency set one the crossover frequency control)
6
INVERSE SWITCH / INVERSE LED
Inverts the polarity of the bass signal by 180°.
7
HIGH OUTPUT
Volume control for mid / high signal.
8
INVERSE SWITCH / INVERSE LED
Inverts the polarity of the mid / high signal by 180°.
9
STEREO MODE LED
Lights up when the crossover is in stereo mode.
6
STEREO
3
5
6
7
8
4
)
4
9
1
2
3
5
4
6
7
8