Front Panel - LD Systems LD X223 Mode D'emploi

FRONT PANEL:

MONO - 3 WAY MODE
MODE BUTTON
1 2
1
GAIN INPUT KANAL 1 (CHANNEL 2 NO
FUNCTION)
Controls the volume of the input signal.
2
LOW CUT SWITCH / LOW CUT LED CHANNEL 1
(CHANNEL 2 NO FUNCTION)
High pass filter (40 Hz, 18 dB/octave); LED indica-
tor when filter is activated.
3
XOVER FREQUENCY
Crossover frequency between bass and mid
signal.
4
LED x10 (switch on the back panel
LED off, crossover frequency between 45 and
960 Hz.
5
LOW OUTPUT
Volume control for bass signal.
6
INVERSE SWITCH / INVERSE LED
Inverts the polarity of the bass signal by 180°.
7
NO FUNCTION IN 3 WAY MODE
8
NO FUNCTION IN 3 WAY MODE
9
MONO MODE LED
Lights up when the crossover is in mono mode.
10
NO FUNCTION IN 3 WAY MODE
8
MONO
3 5 6 7 8
4
x 1)
4
10 11
12
9
13
11
NO FUNCTION IN 3 WAY MODE
12
XOVER FREQUENCY
Crossover frequency between mid and high signal.
13
LED x10 (switch on the back panel
10)
LED on, crossover frequency between 450 and
9600 Hz.
14
MID OUTPUT
Volume control for mid signal.
15
INVERSE SWITCH / INVERSE LED
Inverts the polarity of the mid signal by 180°.
16
HIGH OUTPUT
Volume control for high signal.
17
INVERSE SWITCH / INVERSE LED
Inverts the polarity of the high signal by 180°.
14 15 16 17
x
4