Before Your First Use - DeLonghi DSM800 Série Mode D'emploi

Read the section pertaining to your specific
accessory for additional important safeguards.

BEFORE YOUR FIRST USE

Carefully unpack your accessory and remove all
packaging material. For accessories with blades,
remove the plastic blade covers from the blade
assembly. Use caution when removing the plastic
covers, the blades are extremely sharp. These covers
should be discarded as they are to protect the blades
during manufacture and shipment. Remove any labels
or stickers from the accessory. To remove any dust
that may have accumulated during packaging, clean
your accessory thoroughly before using for the first
time. Read the section pertaining to your specific
accessory for detailed "Care and Cleaning"
instructions.
CAUTION: Be sure to switch "off" and unplug the
stand mixer before cleaning the body and its
attachments. To protect against electrical shock, do
not immerse cord, plug or unit in water or liquid. After
each use, always make sure plug is first removed
from wall outlet.
NOTE: Before using any of the attachments, plug the
stand mixer into a 120V/60Hz AC only outlet, and then
switch it "on" according to the directions in your stand
mixer instruction manual.