Dry Ironing - Beem Power Station Pro4 Mode D'emploi

EN
The following table and the labels attached to garments indicate which temperature set-
ting should be used for ironing. The symbol
steam ironing is not possible at this temperature level.
Temperature
• Synthetics
• Silk
low
• Nylon
• Acrylic
• Acetate
• Wool
middle • Polyester
• Viscose
• Linen
high
• Cotton
• Linen
max .
• Cotton
NOTE
► The following particularly applies to
mixed fabrics and textiles with appli-
cations: if you are unsure which tem-
perature level to use when ironing a
garment, try ironing an area that is
not visible when wearing. Start at a
lower temperature level.
► Iron different textiles preferably in
ascending temperature order.
► Allow the appliance to cool for at
least eight minutes if you wish to
change from a higher to lower tem-
perature level.
BEEM - Elements of Lifestyle
Selecting the ironing temperature
fabric Recommendations
Iron dry and preferably from the inside.
Lay a cloth over the material and steam iron
preferably from the inside.
Damp iron laundry
Steam ironing
Power Station Pro4
in the column on the right indicates that

Dry ironing

Only allow the steam iron to heat up
‹
while it is standing on the base stati-
on.
Insert the plug of the appliance into
‹
the mains socket. The power indicator
(8) and the water tank light (18) light
up.
Press the temperature selection but-
‹
ton (4) repeatedly until the desired
temperature level starts flashing in the
display. As soon as the appliance has
heated up to the selected tempera-
ture, the appliance emits an acoustic
signal and the selected temperature
lights up constantly.
21