Villaware TSVLTRSL01 Mode D'emploi page 8

To select the keep warm function during the toasting process, simply press the keep
warm button once. The keep warm button light will illuminate indicating that this feature
has been selected.
. Push the start/cancel button to initiate the toasting/keep warm process. The amber knob
3
light will illuminate.
During toasting process, you can use the bread carriage lever to move the food
NOTE:
up to check it and down again to continue toasting. That will not interrupt the toasting
process.
. After the desired level of darkness has been reached, the toaster will beep once indicating
4
your food is ready and it will be kept warm for 5 minutes. The toaster will turn on and
off during this period to maintain the food warm without further toasting it. If you wish
to interrupt the keep warm process prior to the 5 minutes, press the keep warm button
once and the keep warm light will turn off. Please note that at the end of the 5 minutes
the food will not pop up automatically.
5 . Move the bread carriage lever up and carefully remove the toasted food from the bread
slots.
Toasted food can be very hot, especially pastry fillings. Handle with care.
WARNING:
To remove food jammed in the bread slots, unplug the toaster and remove the food
TIP:
once the toaster has cooled down.
Never insert your fingers or metallic utensils into the bread slots.
WARNING:
If you wish to cancel the keep warm function, please follow one of the 3 steps below:
a. Prior to starting the toasting process – Simply wait for 10 seconds and this feature will
automatically turn off or press the keep warm button once within the 10-second time
frame to cancel it.
b. During toasting process – Push the start/cancel button once to stop both processes, i.e.
toasting and keep warm.
c. During the toasting process – If you wish to complete the toasting process and cancel
only the keep warm function, wait until the amber knob light turns off and the unit
beeps once and then press the keep warm button once. The keep warm button light
will turn off, indicating that this function has been cancelled.
DEFROSTING
. Place frozen food into the slot or slots.
1
. Follow steps 1 & 2 from the "Toasting" section.
2
. Press the defrost button to select this function. This function can be selected only prior to
3
starting the toasting process. The defrost light will illuminate and you will have up to 10
seconds to press the start/cancel button to start the process.
If the start/cancel button is not pressed within the 10-second time frame, the
NOTE:
defrost light will turn off indicating that this function will no longer be activated.
You can use the keep warm and defrosting functions together. To activate this
NOTE:
feature, press the keep warm button right after you have selected the defrost function.
4 . Push the start/cancel button to initiate the defrosting process. The toaster will defrost the
food and automatically toast it to the selected level.
7