Before First Use - Villaware TSVLTRSL01 Mode D'emploi

before first use
PREPARING TO USE YOUR TOASTER FOR THE FIRST TIME
1. Remove any stickers from the surface of the unit and wipe the
outside of your toaster with a damp cloth.
2. Ensure that the full bottom removable crumb tray is in its place.
Figures 1 & 2.
3. Select a location for the toaster. The location should be:
• A flat, heat-resistant, non-flammable surface.
• At least 8 cm away from walls or the back of countertops.
• At least 30 cm distance from the top of the toaster to the
bottom of the cabinet.
• Away from flammable materials, such as curtains and wall fabric.
• Away from a gas stove flame or electric element.
4. Plug the power cord into the appropriate electrical outlet.
5. Without inserting any food into the bread slots, push the bread lever all the way
down.
6. Set the toaster dial to level 2.
7. Push the start "
8. The first toasting process will preheat the new elements and burn off any dust, which
may have accumulated during storage or manufacturing. It is normal for this burn off to
create an odour.
9. Once toasting is complete, unit will sound 3 times.
10. Move lever up.
Your Toaster is now ready for use.
operating instructions
Inserting the food into the bread slots for toasting:
• Now you are ready to insert your food into the bread slots. Keep the following tips in
mind when inserting your food.
• Most types of breads and pastries can be toasted, such as thickly sliced breads, waffles,
etc. Slices should not, however, be so thick as to jam the bread slots. Remember, the
toast setting is the default setting.
• When toasting two slices at a time, the slices should be of equal size and freshness to
ensure even toasting.
• When toasting two slices of bread, place one slice in the centre of each bread slot.
• When toasting one slice of bread, place the slice in the centre of either bread slot.
" button to start the toasting process.
5
1
Figure
2
Figure