USRobotics 5465 Guide D'installation Rapide page 8

English
2. Connect the router to your computer and wired network devices:
A. Connect one end of the supplied Ethernet cable to your computer's
Ethernet port.
B. Connect the other end to one of the router's LAN ports
3. Power up the network:
A. Turn on your modem. Wait until the modem LEDs stabilize before pow-
ering up your router.
B. Connect the supplied power adapter to the power port on the router.
C. Plug the power adapter into a standard power outlet.
N o te : This product is intended to be supplied by a Listed Direct Plug-in
Power Unit marked Class 2 and rated 9VDC, 1200 mA.
D. Turn on your computer.
Step Two: Configure the Basic Connection Settings
1. Start your Web browser.
2. In the location or address line, type
ENTER to access the router configuration pages.
N o te : The router's default IP address is
3. Click Start. The Setup Wizard leads you through the basic router configura-
tion process.
N o te : If you see a "Page Not Found" error at any time while using the
router configuration pages, press the Back button in your web
browser or refresh the page.
4
http://192.168.2.1
http://192.168.2.1
and press
.