Additional Information - USRobotics 5465 Guide D'installation Rapide

English
My ISP requires me to use a specific MAC address for the
device that connects to my modem.
S o l u t i o n :
Your ISP may require you to change the router's MAC address to match a spe-
cific MAC address, such as the address of the Ethernet adapter that was previ-
ously connected to the DSL or Cable modem. If you need the router to clone a
MAC address:
1. Complete the installation instructions in this guide.
2. When you are returned to the configuration pages after the initial configura-
tion, click the Internet tab.
3. Under Clone MAC address, use the Client devices list to select the MAC
address that should be applied to the router.
4. When you are finished, click Save. The router will restart and you should
then have an Internet connection.

Additional Information

For regulatory and warranty information, see the User Guide on the
USRobotics Installation CD-ROM.
For operation and configuration information, see the User Guide on the
USRobotics Installation CD-ROM. The User Guide contains detailed informa-
tion on the use and configuration of your Wireless MAXg Router.
For expanded troubleshooting and additional information, see:
1. See the User Guide on the USRobotics Installation CD-ROM.
2. Go to the Support section of the USRobotics Web site at
www.usr.com/support/.
Many of the most common difficulties that customers experience have been
addressed in the FAQ and Troubleshooting Web pages for your Wireless
MAXg Router. The Support pages also contain information on the latest
firmware and may contain documentation updates.
3. Submit your technical support question using an online form, or contact the
USRobotics Technical Support Department.
4. See the Support contact information on the last page of this guide.
12