Panic - Alpine SEC-8028 Mode D'emploi

16

Panic

The system allows the siren to be intention-
ally turned on by the remote control
transmitter in case of an emergency
situation.
To Activate the Panic
Function
1. Press and hold the TX button for two
seconds to activate the panic function.
(The remote control LED will illuminate to
indicate that the signal is being transmit-
ted.)
2. The siren will sound and the parking
lights will flash for the programmed siren
duration.
Note:
Flashing parking lights may be optional.
Consult your Alpine dealer for more
information.
To Deactivate the Panic
Function
Press the TX button to deactivate the panic
function.
(The remote control LED will illuminate to
indicate that the signal is being transmit-
ted.)
English