Alpine SEC-8028 Mode D'emploi page 10

1
2
3
4
10
Arming
When the system is armed by the remote
control transmitter, you will observe the
following:
The siren will "chirp" once (if chirp on/off
switch is set ON).
The parking lights will flash once.
The doors will lock.
The extension LED will flash.
Notes:
• The SEC-8028 incorporates a feature
called faulty sensor bypass. If the SEC-
8028 detects a faulty sensor when
armed, it will chirp the siren three times
after arming and will ignore that sensor
input. The siren will chirp three times
45 seconds after arming if the door
sensor is defective and six seconds
after arming if any other sensor is
defective. Once any sensor is restored
back to a normal condition, the system
will immediately resume protecting that
sensor input.
• Flashing parking lights and door locks
may be optional. Consult your Alpine
dealer for more information.
English