Double Insulation For Safer Operation - Metabo S 18SB Mode D'emploi

25. ALWAYS follow the instructions contained in this
manual when replacing the accessories.
26. NEVER leave the revolving tool unattended on the
fl oor.
27. NEVER mount a depressed center wheel on this tool
and attempt to use it as a disc grinder.
28. Secure the workpiece and check that the workpiece
is properly supported. A workpiece clamped with
clamping devices or in a vice is held more securely
than by hand.
29. Defi nitions for symbols used on this tool
V ..............volts
Hz ............hertz
A ..............amperes
n ..............rated speed
W .............watt
...........Class II Construction
---/min ......revolutions per minute
MAKE THEM AVAILABLE TO OTHER USERS
SAVE THESE INSTRUCTIONS
AND
AND
OWNERS OF THIS TOOL!
DOUBLE INSULATION FOR SAFER
OPERATION
To ensure safer operation of this power tool, metabo HPT
has adopted a double insulation design. "Double insulation
" means that two physically separated insulation systems
have been used to insulate the electrically conductive
materials connected to the power supply from the outer
frame handled by the operator. Either the symbol "
the words "Double insulation" appear on the power tool or
on the nameplate.
Although this system has no external grounding, you must
still follow the normal electrical safety precautions given in
this Instruction Manual, including not using the power tool
in wet environments.
To keep the double insulation system eff ective, follow
these precautions:
○ Only metabo HPT AUTHORIZED SERVICE CENTER
should disassemble or assemble this power tool, and
only genuine metabo HPT replacement parts should
be installed.
○ Clean the exterior of the power tool only with a soft
cloth moistened with soapy water, and dry thoroughly.
Never use solvents, gasoline or thinners on plastic
components; otherwise the plastic may dissolve.
English
" or
7