Troubleshooting (1); Troubleshooting (2) - AEG BMG 5677 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41

14. TROUBLESHOOTING (1)

PROBLEM
LCD Display shows
battery symbol
LCD Display shows
"EE"

15. TROUBLESHOOTING (2)

PROBLEM
LCD Display
shows"EE"
LCD Display shows
abnormal result
No response when
you press button or
load battery.
POSSIBLE CAUSE
Low Battery
Arm or blood pressure moni-
tor was moved during testing.
The cuff does not inflate prop-
erly or pressure falls quickly
during testing.
Irregular heartbeat
(arrhythmia)
POSSIBLE CAUSE
The cuff was not properly ap-
plied or the rubber tube was
bent or pressed.
The cuff position was not
correct or it was not properly
tightened.
Body posture was not correct
during testing.
Speaking, arm or body
movement, angry, excited or
nervous during testing.
Incorrect operation, or strong
electromagnetic interference.
English
SOLUTION
Change all the batteries.
Re-test taking care to not move
your arm or the blood pressure
monitor.
Make certain the rubber tube is
fully inserted into the blood pres-
sure monitor.
It is inappropriate for people with
serious arrhythmia to use this blood
pressure monitor.
SOLUTION
Review the cuff applying and test-
ing sections of the instructions and
re-test.
Apply the cuff correctly and try
again.
Review the body posture and
testing sections of the instructions
and re-test.
Re-test when calm and without
speaking or moving during the
test.
Take out batteries for five minutes,
and then reinstall all batteries.
105

Publicité

Table des Matières
loading

Table des Matières