Backlighting Of The Lc Display; Reset - Eurochron EFWS 700 Mode D'emploi

m) Backlighting of the LC Display
Briefly push the button "SNOOZE/LIGHT" (3) to activate the backlighting of the LC
display of the basis station for about 5 seconds.
n) Reset
Briefly pushing the recessed button "RESET" (7) on the back of the basis station
resets it,e.g. when only a defective display is shown after insertion of the batteries.
All stored data is lost.
Alternatively, you may remove the batteries from the basis station and insert them
again.
Then proceed as described in chapter 9.
58