Oehlbach BTR Xtreme 5.0 Mode D'emploi page 22

Coupling 2 devices (RX)
Turn on the BTR Xtreme 5.0 and select the RX mode. Pair
the mobile phone or other Bluetooth device with the BTR.
After successful pairing press the on/off button twice.
This will disconnect the connection and search for a new
device. From the second Bluetooth device, turn on the
Bluetooth search mode and pair with the BTR Xtreme. After
successfully pairing the second Bluetooth device, turn on
the first Bluetooth device and select the BTR Xtreme from
the paring list. After this step both Bluetooth devices are
successfully connected.
2 Coupling devices (TX)
Turn on the BTR and set it to TX mode. Now proceed as for
pairing in RX mode.
Pause/play music
Press the On/Off button once to play or pause music.
Troubleshooting
The BTR Xtreme 5.0 cannot be switched on
a) Please make sure that the BTR Xtreme 5.0 is sufficiently
charged
b) Check if you press and hold the on/off button for at least
2 seconds
The BTR Xtreme 5.0 cannot be connected to another
device
a) Make sure that the Bluetooth device is no more than 1 m
away during pairing mode.
22