Operating Modes - Oehlbach BTR Xtreme 5.0 Mode D'emploi

acts as a Bluetooth transmitter:
1. Before pairing the BTR Xtreme 5.0 with devices, other
Bluetooth enabled devices should be switched off. This
ensures a problem-free pairing of the devices.
2. Set the selector switch of the BTR Xtreme 5.0 to "TX".
Then switch on the BTR Xtreme by pressing the ON/OFF
button.
3. Press the on/off button of the BTR Xtreme 5.0 twice in
quick succession to enter pairing mode. Now the function
light should flash alternately red and blue.
4. The BTR Xtreme 5.0 can now be found by other Bluetooth
enabled devices and pairing is possible.
5. When pairing is complete, the blue LED flashes once
every 8 seconds and audio signals can be transmitted.
6. To switch off the BTR Xtreme 5.0, press and hold the On/
Off button for 2 seconds.
BTR Xtreme 5.0 as a Bluetooth Receiver
In receiver mode the BTR Xtreme 5.0 can be connected
to other Bluetooth enabled devices that use a Bluetooth
transmitter to send audio signals wirelessly. Here the BTR
Xtreme 5.0 acts as a Bluetooth receiver. To use the BTR
Xtreme 5.0 in receiver mode, set the selector switch of the
BTR Xtreme 5.0 to "RX" and follow the instructions above
from point three.

Operating modes

Switch on
Press the On/Off button for at least 2 seconds. The blue
LED lights up 3 times.
20