Oehlbach BTR Xtreme 5.0 Mode D'emploi page 21

BTR Xtreme 5.0
Switch off
Press the On/Off button for at least 2 seconds. A red light
comes on.
Automatic switch off
If no connection is established within 5 minutes in pairing
mode, the BTR Xtreme 5.0 will automatically switch off.
If the battery charge is less than 3.3V, all LEDs light up red.
If the battery charge is less than 3.1V, the device switches
off automatically.
Change mode
Change the switch from TX to RX (or vice versa). Always
change the mode with the power off.
Connecting devices
Press the On/Off button of the BTR Xtreme twice. The LED
flashes alternately red and blue and searches for other
Bluetooth devices. When the BTR Xtreme is connected, the
blue LED lights up once every 8 seconds.
Terminate connection
If no connection is established after 300s, the connection
mode is automatically aborted.
Erase memory
When the mode is changed (TX/RX), the memory is erased
accordingly. Always change the mode when the power is
off.
21