General Operation - Led Display Chart; Program Mode - Led Display Chart - Master Lock dialspeed 1500eD Manuel D'utilisation

General Operation - LED Display Chart

LED Display Status
Arrows and center button on for 1 second. Wake Up
Center button lights blue and arrows flash Code Entry
with each press.
Center button green for 1 second. Arrows Correct Code
rotate clockwise twice.
Center button blue. Arrows flash twice. Clear Entry
Center button flashes red 3 times. Code Failed - Max.
Length
Center button green for 1 second. Arrows Locked
rotate counter-clockwise twice.
Center button fades in and out red in Lockout - 3 Incorrect
1 second, then off for 2 seconds. Repeats Code Entries
for 1 minute.
Center button red for 1 second, then sleep Time Out
mode.
5 second time out, no lights on. Time Out - Lock Not
Opened
Center button flashes yellow for 4 seconds. Low Battery
Condition
When in locked sleep mode
and center button is pressed.
(First arrow button pressed
counts towards code entry)
When in locked sleep mode
and any arrow button is
pressed or during code entry
to unlock.
After valid code is accepted,
shackle can be pulled open.
After center button is pressed
to clear a code entry.
After 12 arrow button presses
are made.
After shackle is closed.
After 3rd incorrect code entry.
Pressing center button during
code entry to clear the lock
counts as incorrect entry.
5 seconds after last button
press in locked mode.
5 seconds after unlocking
without raising the shackle.
Lock relocks.
After first button press from
locked sleep mode if battery
voltage low.
7

Program Mode - LED Display Chart

LED Display Status
Center button white. Each arrow with a Stored Code Positions
stored code lights until button is pressed.
Center button white. Selected arrow Arrow Position Selection
position flashes twice, then all arrows off.
Center button green. Selected arrow Arrow Position Deletion
flashes 3 times. Arrows with stored codes
light for 1 second, then sleep mode.
Center button flashes red 6 times, then Arrow Position Deletion
sleep mode. Failed - Primary Code
Center button white. Awaiting New
Code Entry
Center button lights white and arrows Code Entry
flash with each press.
Center button fades in and out white in Awaiting Code
1 second. Repeats until any button is Confirmation
pressed or timeout is reached.
Center button green. Selected arrow Code Accepted
flashes 3 times. Arrows with stored codes
light for 1 second, then sleep mode.
Center button flashes magenta 6 times, Code Rejected - Invalid
then sleep mode.
Center button flashes red 3 times, then Code Rejected - Does
sleep mode. Not Match
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. This Class B digital apparatus complies with Canadian ICES-003.
Condition
After pressing center button 2
seconds to enter Program Mode.
After pressing an arrow
followed by the center button.
After pressing and holding
the selected arrow position for
5 seconds.
After the UP position arrow is
selected for deletion.
After center button pressed to
enter new code.
During new code entry.
Waiting for code
confirmation entry.
When confirmation code
matches initial code.
When new code is invalid.
When confirmation code does
not match initial code.
8