1500eD User Manual
KEEP THIS USER MANUAL FOR REFERENCE
Instructional Video at www.masterlock.com
Table of Contents
INDOOR USE ONLY
(between 32°F to 122°F, 0°C to 50°C)
Do not allow lock to get wet.
Pg. 2
Pg. 3
Pg. 3
Pg. 4
Pg. 5
Pg. 6
Pg. 7
Pg. 8
1
Primary Code
Code primaire
For Backup Master Code, visit masterlockvault.com and enter Vault
Pour le Code Master de secours, visitez masterlockvault.com et saisissez le code de
produit Vault
plus haut.
®
QUICK START GUIDE
1. OPEN THE LOCK the first time with the factory-set PRIMARY CODE above, by pressing the
4 corresponding arrow buttons in the sequence shown. Do not pull on the shackle when
entering the code.
2. When the center button lights green, open the lock within 5 seconds or it will relock.
You can use the PRIMARY CODE as your everyday code or you can change it.
HOW TO CHANGE THE PRIMARY CODE
1. With the lock open, press and hold center button for 2 seconds. Center button will light white,
indicating the lock is in program mode. The UP arrow will light, indicating a Primary Code is
stored there.
2. Press the UP arrow. The UP arrow is the only position in which you can program
and store the Primary Code.
3. Press the center button. The UP arrow will blink twice, indicating the PRIMARY
CODE is ready to be changed.
4. Enter a new sequence of arrows, letters or numbers by pressing the corresponding
buttons. The sequence must be at least 4 and no more than 12 positions in length.
5. Press the center button.
6. Re-enter the code entered in step 4 to confirm.
7. Press the center button. It will light green to indicate you have successfully changed
the PRIMARY CODE.
Store your code safely at www.masterlockvault.com.
Vault
Product Code
®
le code de produit Vault
®
Product Code above.
®
2