Wacom Cintiq 27QHD Guide De Mise En Route page 8

Setting up the Cintiq
EN
1. To attach cables, turn the Cintiq
over and place on a cloth to
protect the screen. Remove the
cable cover.
2. Connect the cables to the Cintiq
as shown in the diagram on the
right.
3. Turn off the computer. Connect
the HDMI or DisplayPort cable to
the corresponding connector on
your computer.
4. Plug the USB connector into
an available USB port on your
computer. Plug the power cable
into the power adapter and then
into an AC outlet.
5. Turn on the Cintiq by pressing the
power button.
5
Swift_QSG_EN.indb 5
HDMI or
DisplayPort
cable
Power cable
USB cable
8/21/2014 10:46:06 AM