Saci pumps ejoy Manuel D'installation Et D'entretien page 29

Par. Description
3.01 WASH SPEED
3.02 WASH DURATION
3.03 RINSE DURATION
3.04 DIRTY FILTER WARNING PRESSURE
Par. Description
4.01 PRESENCE OF LIGHTS
4.02 LIGHTS ON, MONDAY*
4.03 LIGHTS START, MONDAY*
4.04 LIGHTS END, MONDAY*
4.23 RGB TEST
* There is a complete configuration for every day of the week. This manual only explains how to configure Monday, but
the process is the same for the other days of the week.
Par. Description
5.01 SKIMMING DURATION
5.02 SKIMMING INTERVAL
5.03 SKIMMING FLOW
3. LAVADO DE FILTRO
VALUES
Units.
Default Min.
rpm 2800 700
min 5 1
min 1 0
bar 1,5 1
4. LIGHTS
VALUES
Units.
Default Min.
NO NO
OFF OFF
00:00
00:00
5. SKIMMING
VALUES
Units.
Default Min.
min 2 0
h 3 1
rpm 2800 700
27
Max.
Sets the speed of the pump for the filter cleaning
2800
process.
60 Pump operating time during the filter wash process.
Once the filter is clean, the operating time of the
60 pump for rinse the remaining dirty water from the
filter.
Pressure from which a warning will appear on
the screen requiring the filter to be cleaned (for
2.5
this function it is necessary to install a pressure
transducer).
Max.
The daily lighting cycle of the pool is programmed if
YES
it is indicated that there are lights.
ON Enable/disable pool lighting on Mondays.
Indicate the start time of the lighting cycle.
Indicate the end time of the lighting cycle.
Enables the colour sequence to be changed if there
are RGB LEDs in the pool.
Max.
To program the duration of the surface cleaning
5
program (SKIMMING) of the pool. If 0 minutes is
indicated, SKIMMING is disabled.
Indicate how often the SKIMMING program is to be
24
started.
Tell the pump what speed is required for the
2800
SKIMMING program.
EN
Notes
Notes
Notes