Installation And Use - Casselin CCF2 Mode D'emploi

- The appliance must be connected with a single-phase socket in conformity.
- Before any installation check all the electric cables or piping
- Do not use the appliance in case it does not function properly, it has been
damaged or dropped.
- Never use your appliance with wet or moist hands.
WARNING !
Operating your appliance can reach very high temperature. To avoid injuries and
burns do not use the appliance if it is damaged. Do no use spare parts not
provided with your appliance
DANGER ELECTRIC SHOCK !
In the event of bad installation, the appliance can be dangerous and cause injuries. The
electrical safety of this appliance is ensured only if it is correctly connected to an
efficiently earthed system in accordance with electrical safety regulations. The appliance
must be unpacked entirely before the connection.

5.2 Installation and use

WARNING !
Installation and maintenance must be only carried out by qualified technician.
Never let your appliance operating without supervision.
Always operate with dry hands.
Operating never move or tilt your appliance.
Operating instructions :
- Remove all protective foils and packaging material prior to usage.
- Place the appliance on a flat, solid, and heat-resistant surface, on its vertical
position. Never install your appliance on inflammable surface.
- Do not install the appliance near open fireplaces or all hot sources.
- Do not place the appliance near inflammable material. Combustion degree of
building materials classified according to the combustion degree of materials and
products (EN 730823)
A noncombustible granit, sandstone, concretes, bricks, ceramic wallfacing tiles,
plaster
B uneasily combustible akumine, heraklite, lihnos, itavere
C1 hardly combustible leafy wood, plywood, sirkoklit, rare paper formica
C2 middle combustible fi breboards, solodure, cork boards, rubber,fl oor-coverings
C3 easily combustible wood-fi breboards, polystyrene,polyurethane, PVC.
- If the appliance is to be located near a wall, it must be heat resistant to 60°.If the wall
Version 010415
17