Tools Needed - Haiku AC Neutral Guide D'installation

TOOLS, PARTS, AND HARDWARE
Haiku Light is suitable for indoor and covered outdoor locations.

Tools Needed

• Ladder
• Phillips Screwdriver
Parts and Hardware
Mounting Plate & Hardware
a
• (2) 1/2" Washers
1
• (2) #8-32 x 1-1/2" Screws
Fixture
b
Wire Connectors
2
c
(2) Torsion Springs & Hardware
d
• (4) #6-32 x 5/16" Screws
Socket Adapter
3
e
Handheld Remote
4
f
1 The mounting plate hardware is used only if you are installing the fixture directly to an outlet box.
2 The wire connectors are pre-attached to the fixture wires.
3 The torsion springs, screws, and socket adapter are used only if you are installing the fixture to recessed housing.
4 Remote buttons depend on fixture model; only Premier fixture includes color temperature controls.
2
1
3
3
d
a
c
b
REV. E
e
© 2016 HAIKU HOME. ALL RIGHTS RESERVED.
f