Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Do not use power tools to install the torsion springs!
!
1
Remove the mounting plate from the fixture by twisting counterclockwise. Install the torsion springs
on the mounting plate with the provided screws in the 5" or 6" hole location. Note: 6" hole location
illustrated.
Torsion Spring Hardware:
a. (4) #6-32 x 5/16" screws
2
Screw the socket adapter into the socket inside the recessed housing.
HAIKU® HOME
WWW.HAIKUHOME.COM/SERVICE
●
1-855-MY-HAIKU
●
STEPS COMPLETED
9
Publicité
Table des Matières
