Entsorgung; General Power Tool Safety Warnings; Electrical Safety - Defort DWP-1000 Mode D'emploi

Masquer les pouces Voir aussi pour DWP-1000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

● Steckdose defekt.
● Gerät defekt.
5.2. Störung:
Kunststoffreste bleiben an den
Heizwerkzeugen kleben.
Ursache:
● Heizwerkzeuge verschmutzt
(siehe 4.2.).
● Antiadhäsive Beschichtung
beschädigt.

6. ENTSORGUNG

Die Heizelement-Muffenschweißgeräte dürfen nach ih-
rem Nutzungsende nicht über den Hausmüll entsorgt
werden. Sie müssen nach den gesetzlichen Vorschriften
ordnungsgemäß entsorgt werden.
Plastic tube welding machine
Fig. 1-2
1
Supporting stand
2
Temperature adjusting screw
3
Handle
4
Heating element
5
Welding tools (heating spigot + socket)
6
Green power-on indicator lamp
7
Red temperature indicator lamp
Fig. 3
(1) Preparations
(2) Heating element
(3) Sleeve
(4) Heating spigot
(5) Heating socket
(6) Pipe
(7) Heating
(8) Completed joint
1. GENERAL POWER TOOL SAFETY WARN-
INGS
WARNING
To reduce the risk of injury, the user must read and un-
derstand the instruction manual.
Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fi re and/or
serious injury. The term "power tool" in all of the warn-
ings listed below refers to your mains operated (corded)
power tool or battery operated (cordless) power tool, al-
so machines and electric units. Only use the power tool
for the purpose for which it was intended, with the due
attention to the general safety and accident prevention
regulations.
KEEP ALL SAFETY NOTES AND INSTRUCTIONS
FOR THE FUTURE.
A) Work area
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of fl ammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
B) Electrical safety
a) Power tool plugs must match the outlet. Never modi-
fy the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodifi ed
plugs and matching outlets will reduce risk of elec-
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

98291759

Table des Matières