Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
To Sony dealers
Be sure to thoroughly read the
safety precautions described
previously and pay special
attention to safety during the
installation, maintenance,
checking, and repair of this
product.
Be sure that two or more persons do
the installation work.
Be sure that two or more persons install the TV on the TV
Stand. If one person does the installation work alone, this
may result in an accident or injury. Be sure to keep children
away during the installation.
Be sure to assemble the TV Stand
securely following the instructions.
If a screw is not tightened securely, or
it has fallen out, it may cause the TV
Stand to topple over. This may cause
damage or injury.
Be careful not to injure your hands
or fingers while assembling.
Be careful not to pinch your fingers or hands when
assembling the TV Stand and installing the TV.
Be sure to install the TV securely
following the instructions.
Tighten the screws securely. If the TV is not installed
securely, it may fall and cause injury.
Step 1:
Checking the parts
Name
Top Board
Base Board
1
Side Pillar (L)*
1
Side Pillar (R)*
Rear Pillar
Front Panel
Glass Shelf
Screw (+PWH5 × 25)
Screw (+K4 × 20) + Sleeve
Cam-lock screw
Screw (+P4 × 15)
Anchor bolt
Screw cap
Speaker Hook (L)
Speaker Hook (R)
Paper template
Tape
1
*
The illustrations above are for SU-FL300L. This differs
from SU-FL300M. For SU-FL300M, there is a cutout part
on the side of the Side Pillar.
2
*
For SU-FL300M, three paper templates are provided, one
for each TV size (32/40/46 inch).
3
*
For SU-FL300L, two paper templates are provided, one
for each TV size (46/52 inch).
Be sure to have a Phillips screwdriver that fits the screws
indicated above prior to the assembly.
Quantity
1
1
1
1
1
1
1
8
2
4
4
2
3
1
1
2
3*
3
2*
1
5
(US)
Publicité
Table des Matières
