Using The Product - Terraillon TH1009N Manuel D'utilisation

CHOOSING THE TEMPERATURE MEASURING UNIT (C° OR F°)
• Press one of both buttons to turn on thermometer. Then, to switch from one measuring
unit to the other, press around 5 seconds [M].

USING THE PRODUCT

FOREHEAD TEMPERATURE
Place the thermometer in your hand as shown with your thumb on
the [measure] button.
• Press the [measure] button
• Place the thermometer from 0 to 5 cm of the forehead and press
the [measure]
the distance is correct.
• If the position is OK, release the button, but keeping the thermometer flat until you hear
another double beep sound indicating that the temperature has been taken. The screen
lights up displaying temperature. The measurement is complete and the thermometer
may be removed from the head.
• You can read the temperature on the display and the color indicator (red or green)
around the [measure] button helps to analyze the temperature, if fever or not.
ol
• Temperature is automatically memorised.
CAUTION:
After press the measure button, the distance sensor will detect the distance
between the forehead and thermometer. If the distance is between 0- 5cm, it will
directly test the forehead temperature.
If the distance is more than 5cm, short successive beep sounds will be issued
indicating that the thermometer should be moved to the forehead in 0- 5 cm.
When the correct distance is reached a double beep signals it.
If it is not the proper distance for forehead temperature, the thermometer will
measure ambient temperature.
NON-CONTACT INFRARED THERMOMETER
to turn on the thermometer.
button again. A double beep sound indicates that
EN
Green: 34.0°C (93.2°F) ~ 37.9°C (100.3°F)
Red: 38.0°C (100.4°F) ~ 42.9°C (109.3°F)
15