Sony PCGA-BM1 Mode D'emploi page 25

Masquer les pouces Voir aussi pour PCGA-BM1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1
Set the DIP switch 1 (setup/normal operation mode selector)
on the bottom panel of the unit to ON and the DIP switch 3
(private ON/OFF selector) to OFF.
For details, refer to "DIP Switch Settings" on page 17.
2
Turn on the power of the PCGA-BM1.
3
Activate Bluetooth communication on the notebook and
establish a link to the PCGA-BM1.
For details, refer to the manuals provided with your Sony notebook.
4
Click the "Start" button and go to "Programs", then "Modem
Station Utility", and click "Modem Station Utility".
The "Destination" dialog box appears.
5
From the "Communication Port" list box, select the port
assigned to Bluetooth communications, and click the "OK"
button.
If you are not sure about the communications port, refer to the manuals
provided with your Sony notebook.
Clicking the "OK" button starts the modem station utility.
6
Click the "Passkey" tab.
7
Enter the old Passkey and new Passkey in the respective
fields, then re-enter the new Passkey in the confirmation
field.
The Passkey can be any alphanumeric string of up to 16 characters.
8
Click the "Change" button.
A confirmation message for the Passkey change appears.
9
Click the "OK" button to close the message.
A message indicating the result of the Passkey change procedure
appears.
Continued on next page
GB
25

Publicité

Table des Matières
loading

Table des Matières