Changing The Pcga-Bm1 Settings; Installing The Modem Station Utility; Changing The Passkey - Sony PCGA-BM1 Mode D'emploi

Changing the PCGA-BM1 Settings

Installing the modem station utility

The modem station utility serves for changing PCGA-BM1 settings. Install
the utility from the supplied CD-ROM.
Note
Before starting the procedure below, the notebook must be set up to read CD-ROM discs.
For details on CD-ROM use, refer to the manuals provided with your Sony notebook and/
or the CD-ROM drive.
1
Insert the utility CD-ROM into the notebook's CD-ROM drive
or other drive capable of reading CD-ROMs, such as a DVD
drive.
2
Double-click the "My Computer" icon and then double-click
the "CD-ROM" drive icon.
3
Double-click the "MSUtil" folder.
4
Double-click "Setup.exe".
The installation program for the modem station utility starts. Install the
program by following the prompts that appear on the display.

Changing the Passkey

The Passkey that is used for Bluetooth bonding of the notebook can be
changed to any alphanumeric string with the modem station utility.
The factory default Passkey for the PCGA-BM1 is the serial number of the
unit, as shown on a label on the bottom panel. For the location of the label,
refer to "Bottom view" in the section "Names of Parts" on page 12.
Notes
• If the modem station utility is not installed, it must first be installed as described above.
• The Passkey is case-sensitive.
GB
24