Installation; Telephone Line Connection - Sony PCGA-BM1 Mode D'emploi

Masquer les pouces Voir aussi pour PCGA-BM1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation

Telephone line connection

Use the supplied telephone cable to connect the PCGA-BM1 to the
telephone line.
Note
The data transfer rate between the Bluetooth compatible device and the modem station is
about 30 kbps for a dial-up connection. (The actual data transfer rate will vary, depending
on factors such as the presence of obstacles between devices, radio interference, and the
operating system or the software used. The 30 kbps value applies only to use of the
modem station in conjunction with the PCG-SR31K or PCG-C1VFK).
Telephone cable
(supplied)
To telephone
line
Telephone line precautions
• Your computer cannot be connected to a coin-operated telephone, and
may not work with multiple phone lines or a private branch exchange
(PBX). If you connect the modem to a parallel connected phone line, the
modem or the other connected device may not function properly. Some
of these connections may result in excess of electrical current and could
cause a malfunction in the internal modem.
• If the Internet Service Provider (ISP) provides V.90 or K56flex
compatibility, data transfer rates of up to 56 kbps are possible. However,
the actual rate will depend on line conditions. V.90 or K56flex is selected
automatically.
GB
12
LINE
CLEAR
To LINE
connector
Telephone cable
(supplied)

Publicité

Table des Matières
loading

Table des Matières