Description; Technical Data - Hilti PMA 30 Mode D'emploi

Location of identification data on the tool
The type designation and serial number can be found on
the type identification plate on the tool. Make a note of
this data in your operating instructions and always refer
en

2 Description

2.1 Use of the product as directed
The Hilti PMA 30 laser receiver is designed to detect the
laser beams from the PML 32‑R line laser.
The tool and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when
used not as directed.
Modification of the tool or tampering with its parts is
not permissible.
Observe the information printed in the operating instruc-
tions concerning operation, care and maintenance.
Take the influences of the surrounding area into account.
Do not use the tool where there is a risk of fire or
explosion.
2.2 Items supplied with the laser receiver
1 Laser receiver
1 Operating instructions
2 Batteries
1 Manufacturer's certificate

3 Technical data

Right of technical changes reserved.
Operating range (diameter)
Laser plane receiving range (10 m/ 30 ft)
Audible signal generator
Liquid crystal display
Receiving window
Center indication from top edge of casing
Marking notch (center)
Receiver automatic power-off
Dimensions
Weight
Power supply
Battery life
Operating temperature range
Storage temperature
8
to it when making an enquiry to your Hilti representative
or service department.
Type:
Serial no.:
2.3 Items supplied with the PML 32‑R with laser
receiver
1 PML 32-R line laser
1 Laser visibility glasses
1 Line laser soft pouch
4 Batteries
1 Line laser manufacturer's certificate
1 Ceiling clamp
1 Magnetic bracket
1 PML 32-R line laser operating instructions
1 PRA 50/51 target plate
2 Markers
1 PMA 77 turntable
1 PMA 30 laser receiver
1 PMA 30 operating instructions
1 Laser receiver soft pouch
2 Batteries
1 PMA 30 manufacturer's certificate
2...30 m (6 to 100 ft)
Fine: ± 0.8 mm (0.03 in) Standard: ± 2 mm (0.08 in)
2 volume levels plus mute setting
On both sides
80 mm (2 ³/₄ in)
50 mm (2 in)
On both sides
When no beam is detected : 30 min
165 mm X 67 mm X 24 mm (6.5" x 2.6" x 0.9")
Including battery: 0.2 kg (0.4 lbs)
AA‑size cells: 2
Alkaline batteries, Temperature +20°C (+68°F): 50 h
-20...+50°C (-4 to 122°F)
-30...+60°C (-22 to 140°F)