Linea 2000 Domo DO9019WK Mode D'emploi page 26

DO9019WK
1. Lid
2. release button
3. On/off switch
4. Handle
5. Base
6. Spout
7. Water level indicator
8. Indication light
FOR FIRST TIME uSE
Before using the device it is recommended that you fill the kettle twice, boil the water
and then discard it.
HOW TO uSE
1. Open the lid by pressing the release button. Fill the kettle with the desired amount
of water between the minimum (0.5 litres) and maximum level (1.7 litres).
2. Make sure the lid is firmly closed before connecting to the electric mains.
3. If you have not closed the lid properly the unit will not switch off when the water
boils.
4. If you heat less water than the minimum level the kettle will switch off before
boiling.
5. To avoid danger make sure you don't fill your kettle with more than 1.7 litres of
water, otherwise hot water may be released from the
spout.
6. Make sure that the kettle is in a straight position in its
base so that it makes proper contact.
7. Push the plug into the electric socket and use the On/
Off switch to turn the kettle on. The indicator lamp will
switch and the water will be heated.
8. The kettle will switch off automatically as soon as the
after comes to the boil. During the boiling process you
can switch the kettle off using the On/Off switch.
9. Carefully remove the kettle from its base and pour the
desired amount of water.
10. DANGER: Never open the lid when the water is
1
6
7
8
26
2
3
4
5