Linea 2000 Domo DO9019WK Mode D'emploi page 24

DO9019WK
• Read all instructions before use
• Before connecting the kettle on the mains you must first
make sure;
• The base supplied with this kettle may be used only for
this appliance and for no other.
• The voltage indicated on your appliance matches the
voltage in your home.
• The base supplied with this kettle may be used only for
this appliance and for no other.
• Never use the appliance without water to prevent
damaging the electric element.
• Remove the plug from the electrical socket when the
appliance is not in use.
• Do not allow the electric lead to hang over the edge of a
table top or sink and so not allow it to touch hot surfaces.
• Place the appliance on a smooth level surface and not near
a cooking stove or oven.
• In the event you do mistakenly switch the kettle on
without filling it with water, the automatic boil-dry
protection will switch your appliance off.
• If this happens you must;
• Allow the appliance to cool off first, then fill the kettle
with cold water, you can use the kettle.
• Make sure that the kettle is placed on a flat and sturdy
surface. This will prevent accidents.
• In order to avoid electrocution: never place the appliance,
the electric lead, the plug or the base in water or any other
liquid.
• When you pour the hot water out you must always
continue to take great care not to do it too quickly in order
to avoid scalding yourself.
24