In countries with relatively high levels of lime in the water supply, it may be
necessary to remove limescale deposits from the aluminium parts using a
de-scaling agent such as acetic acid . Test this first on a area that is not visible
when the wash basin lifter is in use .
The product is to be cleaned with hot water or a mild soapy cleaning agent .
A list of suitable cleaning agents tested by Pressalit can be found on
www .pressalit .com .
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent .
• Do not use an autoclave or other type of steam cleaner .
• Avoid aggressive cleaning agents containing acids
• Never spray the product directly with a high pressure cleaner .
• Avoid use of abrasive, corrosive or chlorine-based cleaning or
disinfecting products .
Maintenance
Expected service life of the wash basin lifter is 10 years, provided that
maintenance is carried out as described below:
It is recommended on a weekly basis to run the motors on the product to their
maximum positions by raising the product to its full height, and then lowering
it to its lowest position, so that the internal parts are lubricated .
It is recommended that service inspection is done once a year .
CAUTION
!
IMPORTANT
en
15