Alarms And Warnings - Industrial Scientific TANGO TX1 Guide De Référence

Indicator overview
Alarm level Audible
System alarm Yes
High-level alarm Yes
Low-level alarm Yes
Low-battery alarm Yes
Warnings Yes*
*If enabled.
Alarm and warning events
Event type Possible causes
System alarms.
A critical fault has occurred.
Note: The "483" value shown here represents a
specific error code. The code number will vary
based on the system alarm event that has
Sample screen
occurred.
(system alarm event)
Indicators
Visual (LEDs) Vibration
Red only Yes*
Red only Yes*
Red and blue Yes*
Red only No
Blue only* No

Alarms and Warnings

Enunciation
Continuous sequence
Continuous sequence
Continuous sequence with pauses
Intermittent
Intermittent
Recommended actions
The unit is not operational.
Leave the area.
Respond according to company safety policy and
guidelines.
See an on-site supervisor or contact ISC Technical
Support (see "Contacts").
Note: Some sensor-related system alarm events can be
addressed by qualified personnel (see Product Manual).
5