ACDelco ARM302-4S Manuel Informations Du Produit page 16

WARNING NOTE FOR USING BATTERIES
1. Please take out the batteries, if the product is not used a long period of time.
2. Please prepare the more backup batteries, when the product is used in other places
without electric power.
3. Do not mix old and new batteries.
4. Do not use the soiled batteries with perspiration and greasiness.
5. Do not throw the batteries at fire, and the batteries have to be recovered.
6. The standard or rechargeable batteries can be used in our products.
7. If the LCD screen cannot display, please check whether the batteries are without
electricity, or replace them.
WARNING
CLEANING AND THINGS TO REMEMBER
1. Use a soft, dry, clean-cloth clean the adapter and LCD panel.
2. Clean torque adapter by wiping. Do not immerse.
3. Store torque adapter in protective case at its lowest torque setting.
4. If the adapter gets wet, wipe it with a dry towel as soon as possible. The salt in
seawater can be especially damaging.
5. Do not use organic solvents, such as alcohol or point thinner when cleaning the
wrench.
6. Do not place the product nearby any magnetic products.
7. Do not exert heavy force or pressure on the LCD screen.
8. Do not use the products as striking tools.
9. Do not hit the products by using hammer or other tools.
10. Exceeding the largest standard torque value may result in the products' damage or
accuracy error (110%).
11. Do not use near or place in water.
12. Do not place the product in the high temperature and damp environment or do not
expose the product to sunlight.
13. Do not place the product in the full dust or sand environment.
14. Do not violently shake or drop the product.
15. Please take out the batteries if the product is not used a long period of time.
16. Do not throw the batteries into fire, and the batteries have to be recycled.
1English1
MAINTENANCE
Remove batteries before cleaning.
English -15