Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation Mode
Operating Temperature
Storage Temperature
BATTERY INSTALL AND REPLACEMENT
Prepare 1 new coin cells of "CR2032".
1.
2.
Loosen the 2 screws on the coin cell cover by a screwdriver.
Replace the coin cells (notice the "+"sign).
3.
4.
Tighten the screws to fix the cover.
NOTE
1.
It will display a low battery symbol in the upper right corner of the LCD display
when the battery voltage drops below 2.3 volts, and it will shut off after several
seconds.
2.
Remove the coin cells if stored for a long period of time.
3.
Keep spare coin cells on hand when going on a long trip or to cold areas.
4.
Do not mix the type of coin cells or combine used coin cells with new ones.
1English1
Resolution
Auto Shut-Off
Battery
Tool Weight
ASSEMBLY
English
1 kg-cm, 0.1 N-m, 1 in-lb, 0.1 ft-lb
Peak (K) / Trace (F)
After 2 minutes of No Use
-10-60°C
-20-70°C
Coin Cell CR2032 X 2
0.40 lbs (0.18 kg)
SH-DGTS Series
-9
-
+
Publicité
Table des Matières
