Connecting The Cables; Use - Rehan i-See HD Manuel De L'utilisateur

3.4 Connecting the cables

Monitor
EN

4 Use

• Avoid direct sunlight on the screen and tableau.
• Be careful when handling the moving parts of the reading table.
• The i-See HD requires little or no maintenance. If you want to
clean the exterior of the device, only use a dry cloth. The use
of aggressive cleaning products like alcohol, acetone or other
chemical substances is prohibited.
• Do not use the i-See HD as a support for walking, sitting down or
getting up.
• Switch off the device if you do not intend to use it.
• Ensure that the i-See HD is placed in a well ventilated room.
• Place the i-See HD on a stable surface to prevent it from falling.
• Only use your i-See HD indoors. Do not expose the i-See HD to
extreme temperature fl uctuations or humidity. Do not place your
i-See HD next to a heat source or in direct sunlight.
• Only use the supplied cables and connect the power cable to an
earthed socket.
• Ensure that the i-See HD is placed at a minimal distance of
10 cm / 4 inches from the edge of the table.
16
Control interface
i-See HD