Weidmüller VT CL Mode D'emploi page 9

• On-indication
• IP65 (IEC60529)
After unpacking, check that the in-
strument is undamaged. The product
package comprises:
1 pc Tester VT CL
2 pcs batteries 1.5V, IEC LR03
1 pc operating instructions
2. Safety Measures
The tester has been construct-
ed and tested in accordance
with the safety regulations for
voltage testers and have left
the factory in a safe and perfect
condition.
The operating instructions con-
tain information and References
required for safe operation and
use of the tester. Before using
the tester, read the operating
instructions carefully and follow
them in all respects.
3. Danger of electric shock and
other dangers
Verification
shouldn't be dependent on test-
ing with a contactless tester but
only on the voltage test with a 2
pole voltage tester according to
EN61243-3.
The signal during voltage test
has no information on type and
strength of voltage
To avoid an electric shock, ob-
serve the precautions when
working with voltages exceeding
120 V (60 V) DC or 50 V (25 V)
eff AC. In accordance with DIN
VDE these values represent the
threshold contact voltages (val-
ues in brackets refer to limited
ranges, e.g. in agricultural are-
as).
The tester must not be used
with the battery compartment
open
Before using the tester, ensure
that the device is in perfect
working order. Look out e.g.
for broken housing or leaking
batteries.
Hold the tester and accessories
by the designated grip areas
only.
of live-circuit
9