Weidmüller VT CL Mode D'emploi page 8

ENGLISH
Operating instructions
References marked on tester or in in-
struction manual:
1. Introduction / Product Package
The contactless voltage tester VT CL
is developed for voltage testing at in-
sulated wires and cables. No direct
contact to the device under test (DUT)
is required.
The contactless tester VT CL is char-
acterized by the following features:
• Designed to meet international safety
standards EN61010-1
• Measurement Category (CAT) IV
1000V
• Contactless voltage testing between
90V and 1000V
• Check for cable breaks
• Phase detection on sockets
• Voltage test through red LED and
buzzer
• Self test
8
Warning of a potential danger,
comply with instruction manual.
Reference. Please pay utmost
attention.
Caution! Dangerous voltage.
Danger of electrical shock.
Continuous
forced insulation complies with
category II DIN EN 61140.
Conformity symbol, the instru-
ment complies with the valid
directives.
Tester complies with the stand-
ard (2012/19/EU) WEEE
The instruction manual contains
information
necessary for safe operation
and maintenance of the tester.
Prior to using the tester (com-
missioning/ assembly) the user
is kindly requested to thoroughly
read the instruction manual and
comply with it in all sections.
Failure to read the tester man-
ual or to comply with the warn-
ings and references contained
herein can result in serious bod-
ily injury or tester damage. The
respective accident prevention
regulations established by the
professional associations are to
be strictly enforced at all times.
double
and references,
or rein-