Vertical Steam; After Ironing - Bosch Sensixx'x DA70 EasyComfort Notice D'utilisation

10 cm / 4 in
18
B O SC H
5. Shot of steam function
shot
Shot of steam can be used to remove stubborn wrinkles
or to press in a sharp crease or pleat.
1 Press the shot of steam button (4) repeatedly with
intervals of at least 5 seconds.

6. Vertical steam

Vertical steam can be used to remove creases from
hanging clothes, curtains etc.
1 Hang article of clothing on a clothes hanger.
2 Operate the iron in a vertical position at a distance of
10 cm / 4 in, and press the shot of steam button (4)
repeatedly with pauses of at least 5 seconds.
Important: If the "SensorSecure" indicator lamp (2) flashes
while ironing in a vertical position, it means that the handle
is not properly gripped and the iron will cool down.
7. Spray
Spray can be used to remove stubborn wrinkles.
1 When ironing, press the spray button (3) and water
will spray out of the spray nozzle (7) onto the
garment.
Tip: Do not use the spray function with silk.

8. After ironing

1 Unplug the iron from the mains socket.
2 Empty the water tank.