EXIT Toys JumpArenA Round Mode D'emploi page 17

How to use the spring loading tool
Firstly hang one side of spring on the triangle attached to the Trampoline Mat,and use
the " spring tool "to hook the other side of spring (As shown in the top image to the
right).
WARNING!! : Please be careful where your hands and other parts of the
body are placed as the connector points and spring attachments can cre-
ate hand or body traps.
STEP 6 - Safety placard Attachment
Using the tie wrap, attach the Safety
Instruction Placard (7) to the trampo-
line. The tie wrap should go around the
Vertical Frame joint and the Top Rail
to ensure that it doesn't slide off the
trampoline.
JumpArenA
Trampolines
Pull the Spring Tool until the spring hook
inserts in the hole on the "trampoline frame"
then disengage the Spring Tool leaving the
Spring in place. Repeat process for all springs .
17