Manually Setting The Date/Time - Hama RC 610 Mode D'emploi

5.2. Manually setting the date/time

Time
• Move the slide switch (5) to the TIME SET position to manually set the time (1).
• Press the ▲ button (6) or the
• Move the slide switch (5) to the
Weekday
• To change the language in which the weekday is displayed, press the
The current language will be displayed.
• Hold down the
Note – Day of the week
You can choose German (GE), English (EN), Swedish (SW), Dutch (DU), Italian (IT), Spanish (SP)
or French (FR) for the weekday display.
Date
• Move the slide switch (5) to the DATE SET position to manually set the date (3).
• Press the ▲ button (6) or the
• Move the slide switch (5) to the
Setting the time zone
Note – Time zone
• The DCF signal can be received over long distances, but always transmits the current Central
European Time in Germany. Make sure you account for the time difference in countries with
another time zone.
• If you are in Moscow, the time is 3 hours later than in Germany. This means that you should set
+3 for the time zone. The clock then automatically sets the time to 3 hours after the DCF signal
received or relative to the manually set time.
• Press and hold the ▲ button (6) for approx. 3 seconds until the time zone symbol
• Move the slide switch (5) to the TIME SET position to manually set the time zone.
• Press the ▲ button (6) or the
• Move the slide switch (5) to the
6
button (7) to set the hours and minutes of the time.
button (7) to change to the other languages.
button (7) to set the date (day, month, year).
button (7) to set the hour offset of the time zone.
position to save your settings and return to normal mode.
position to save your settings and return to normal mode.
position to save your settings and return to normal mode.
button (7) for 3 seconds.
is displayed.
F