Manually Setting The Date/Time - Hama RC 750 Mode D'emploi

Note – Time settings
• If, during initial setup of the device, no DCF radio signal is received within the first few minutes, the
search is aborted. The radio icon will go out.
• If there are reception problems, we recommend leaving the clock to sit overnight, since interference is
generally less at night.
• In the meantime, you can start a manual search for the DCF radio signal at another location or you can
manually set the time and date.
• The clock automatically continues to search for the DCF signal every hour. If the signal is received
successfully, the manually set time and date are overwritten.
Note – Summer time
The clock automatically switches to summer time.
activated.

5.2. Manually setting the date/time

• Press and hold the mode button (4) for approx. 3 seconds until the hours display begins to flash.
• Set the following information in the order listed:
• Hours
• Minutes
• Year
• Month
• Day
• To select the individual values, press the
pressing the mode button (4).
• Press the mode button (4) immediately to adopt the set value displayed and skip ahead.
• If you do not make an entry for 30 seconds, you automatically exit the setup mode.
Weekday
• To change the language in which the weekday is displayed, press the
current language will be displayed.
• Hold down the button (6) to change to the other languages.
Note – Weekday
You can choose English (EN), German (GE), Italian (IT), French (FR), Spanish (SP), Dutch (DU) or Swedish
(SW) for the weekday display.
appears on the display as long as summer time is
button (5) or the button (6) and confirm each selection by
button (6) for 3 seconds. The
5