Philips GC299 Mode D'emploi page 38

Problem
EN The steamer
does not
heat up.
The steamer
does not
produce any
steam.
38
Possible cause
The steamer is
not plugged in
properly or not
switched on.
The steamer is
not plugged in
properly or not
switched on.
The steamer has
not heated up
sufficiently.
You have not
pressed the
steam trigger
fully.
The water level in
the water tank is
too low.
Solution
Check if the mains plug
is inserted properly
and its wall socket is
working.
Check if the steamer is
switched on.
Check if the mains plug
is inserted properly
and its wall socket is
working.
Check if the steamer is
switched on.
Let the steamer heat
up for 45 seconds
(steam-ready lights
up). The steamer is
ready to be used when
the light goes off.
Press the steam trigger
fully for a few seconds.
Unplug the steamer
and refill the water
tank.