Operating Conditions & Requirements - Erie water treatment H2OPTIMO Instructions D'installation Et D'emploi

OPERATING CONDITIONS & REQUIREMENTS
OPERATING PRESSURE MIN-MAX: 1,4-5,0 bar / 20-73 psi

 for cold water applications (max. 48 °C (120 °F)) max. operating
pressure is 8,3 bar (120 psi).
 this system is configured to perform optimally at an operating
pressure of 3 bar (45 psi) ±½ bar (7 psi); in case of a lower or higher
operating pressure the performance may be affected negatively!
 check water pressure regularly.
 take into account that night time water pressure may be considerably
higher than day time water pressure.
 install a pressure reducer ahead of the water softener if necessary.
OPERATING TEMPERATURE MIN-MAX: 2-65 °C / 35-149 °F)

 do not install the water softener in an environment where high
ambient temperatures (e.g. unvented boiler house) or freezing
temperatures can occur.
 the water softener cannot be exposed to outdoor elements, such as
direct sunlight or atmospheric precipitation.
ELECTRICAL CONNECTION:

 this water softener only works on 24VAC; always use it in
combination with the supplied transformer.
 make sure to plug the transformer into a power outlet, which is
installed in a dry location, with the proper rating and over-current
protection.
Page 5
EN - English