Used Symbols - Ohmeron MT488E Mode D'emploi

1. General
Your MT488E is a professional digital multimeter with 3 3/4 digit LCD display,
with built in blacklight (15sec), driven by a 9V battery. The meter meets the
IEC1010 standard and is an ideal tool for use in fabrics, labs and radio-tech-
nology. It measures or tests AC/DC voltage and current, resistance, capaci-
ty, temperature, frequency, duty cycle, transistor, diode and continuity. The
meter also provides functions such as analogue bar and unit display, relati-
ve value measuring (REL), max/min value measuring (MAX/MIN) and
auto/manual range switching (RANGE). Before operation, please carefully
read the operation manual.
2. Safety instructions
Please make sure that you follow these safety instructions:
- Never apply voltages that exceed 1000VDC or 750VAC.
- Do not input current higher than 20A
- When measuring voltages higher than 36VDC or 25VAC, please check the
insulation of the testing leads to avoid electric shocks.
- Remove the test leads when changing function and range.
- Do not input voltage when measuring in current, resistance or continuity
test function.
- Remove the test leads and turn off the meter before changing the battery
and fuse.
3. Description of the meter

3.1. Used symbols

Consult the manual
Dangerous voltage
Replace battery
Digital Multimeter
MT488E
Users manual
Direct Current
Alternative Current
Double isolation
19